specification control drawing te connectivity 305 constitutional drive menlo park, ca 94025 usa raychem products title : (1 to 1 splices-crimp) soldershield splice kit, shielded cable 26 thru 12 awg, ni plated, 1 to 4 conductors unless otherwise specified dimensions are in millimeter s. inches dimensions are in between brackets. document no.: d-150-0228/-0238 tolerances: 0.00 n/a 0.0 n/a 0 n/a angles: n/a roughness in micron te connectivity reserves the right to amend this drawing at any time. users should evaluate the suitability of the product for their application. date: 15-apr-11 doc issue: 7 drawn by: m. foronda replaces: d000671 dcr number: d010337 prod. rev. see table scale: none size: a sheet: 1 of 1 print date: 9-may-11 if this document is printed it becomes uncontrolled . check for the latest revision. product revisions primary awg color product dimensi ons part names no. range code l max a ? 2.54 (0.100) ?d1 ?d2 ?d3 d-150-0228 a 1 26-20 red 80.52 (3.170) 50.30 (1.970 ) 3.00 (0.118) 1.14 (0.045) 2.79 (0.110) D-150-0229 b 1 20-16 blue 80.52 (3.170) 50.30 (1.97 0) 4.00 (0.157) 1.63 (0.064) 4.00 (0.157) d-150-0230 b 1 16-12 yellow 80.52 (3.170) 50.30 (1. 970) 5.00 (0.197) 2.46 (0.097) 4.32 (0.170) d-150-0231 a 2 26-20 red 105.92 (4.170) 74.93 (2.95 0) 4.00 (0.157) 1.14 (0.045) 2.16 (0.085) d-150-0232 a 2 18-16 blue 105.92 (4.170) 74.93 (2.9 50) 5.00 (0.197) 1.63 (0.064) 2.79 (0.110) d-150-0233 b 2 14 yellow 105.92 (4.170) 74.93 (2.95 0) 6.00 (0.236) 2.46 (0.097) 4.32 (0.170) d-150-0234 b 2 12 yellow 105.92 (4.170) 74.93 (2.95 0) 9.04 (0.356) 2.46 (0.097) 4.32 (0.170) d-150-0235 a 3/4 26-20 red 105.92 (4.170) 74.93 (2. 950) 4.00 (0.157) 1.14 (0.045) 2.16 (0.085) d-150-0236 a 3/4 22-20 red 105.92 (4.170) 74.93 (2. 950) 5.00 (0.197) 1.14 (0.045) 2.16 (0.085) d-150-0237 a 3/4 18-16 blue 105.92 (4.170) 74.93 (2 .950) 6.00 (0.236) 1.63 (0.064) 2.79 (0.110) d-150-0238 a 3/4 14-12 yellow 105.92 (4.170) 74.93 (2.950) 9.04 (0.356) 2.46 (0.097) 4.32 (0.170) materials 1. soldershield splice sleeve: heat-shrinkable, rad iation cross-linked modified polyvinylidene fluorid e sleeve, containing two environment resistant sealing r ings and a solder impregnated, flux-coated copper-w ire braid. transparent blue. solder: type sn63 per ansi j-std-006. flux: type rom1 per ansi j-std-004. 2. crimp splice (1, 2, or 4 per kit): nickel-plated copper alloy. 3. sealing splice sleeve (1, 2, or 4 per kit): heat -shrinkable, radiation cross-linked modified polyvi nylidene fluoride sleeve, containing two environment resistant se aling rings. transparent blue. application 1. these kits are designed to make an environment-r esistant, 1 to 1 in-line splice in shielded single, twisted pair, trio and quad cables having nickel-plated conductors and ins ulations rated for 135 ? c minimum. 2. temperature rating: -55 ? c to +150 ? c. 3. for installation procedures refer to the applica ble sections of raychem process standard rcps 150-0 2.
|
